I installed the exhaust last weekend.\u00a0 While under there I noticed the main cable to the starter was loose so I tightened it. I didn’t realize at the time but this cause the terminal to touch the housing internally and therefore break it. So after the exhaust was installed I had to drop the header pipe again so I could remove the starter, take it apart, figure out what was wrong, add a non-conductive spacer to the stud, re-assemble, re-install, and finally re-install the header pipe.<\/p>\n
Easy! \ud83d\ude42<\/p>\n
Oh, one of the exhaust studs’ threads are a bit stripped, but is holding. Hopefully I won’t be posting about how my exhaust is leaking at the manifold anytime soon.<\/p>\n","protected":false},"excerpt":{"rendered":"
I installed the exhaust last weekend.\u00a0 While under there I noticed the main cable to the starter was loose so I tightened it. I didn’t realize at the time but this cause the terminal to touch the housing internally and … Continue reading